|
The EOS 1D Mark II was a professional 8.2 megapixel digital single lens reflex camera (DSLR) camera body produced by Canon. The EOS 1D Mark II was the successor of the EOS 1D and was itself replaced by the Canon EOS-1D Mark III in 2007. ==Features== The EOS 1D Mark II features: * 28.7 × 19.1 mm CMOS sensor * 8.2 megapixel effective (8.5 megapixel total) * DIGIC II image processor * Canon EF lens mount (excludes EF-S) * 1.3x crop factor * 45-point TTL-AREA-SIR autofocus with a dedicated CMOS sensor * TTL full aperture metering with 21 zone SPC * 100–1600 ISO speed equivalent (ISO can be expanded to L: 50 or H: 3200 with custom function) * 30–1/8000 sec. shutter speed and bulb * Auto white balance * Eye-level pentaprism viewfinder with approx. 100% coverage * 230,000 pixel, 2.0" color TFT liquid-crystal monitor with approx. 100% coverage (for JPEG images) * E-TTL II flash mode * 8.5 frames per second continuous shooting (JPEG: max. 40 frames, RAW: max. 20 frames) * Dimensions (WxHxD): 156 × 158 × 80 mm (6.1 × 6.2 × 3.1 in) * Weight (body only): Approx. 1220 g * Battery: Canon NP-E3 NiMH: 12v 1650mAh 300 g * Microphone for recording voice annotations * Shutter lag 40ms The camera's image sensor is a single-plate complementary metal-oxide-semiconductor-based integrated circuit. It has approximately 8.5 million total pixels. It has an RGB primary Bayer filter. A non-removable anti-aliasing filter (optical low-pass filter) is located in front of the image sensor. The shutter is an electronically controlled focal-plane shutter. Its maximum speed is 1/8,000 of one second. Soft-touch shutter release occurs via an electromagnetic signal. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Canon EOS-1D Mark II」の詳細全文を読む スポンサード リンク
|